I am selling the built motor setup and supporting mods that I removed from my 2006 V70R before I put it on Bring a Trailer:
Bid for the chance to own a 2006 Volvo V70R 6-Speed at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #156,005.
bringatrailer.com
The head on the engine has roughly 20k miles on it since it was rebuilt with the cams/valves/etc. The DCTB turbo has about 2000 miles on it. The built shortblock has about 250 miles on it – when I had it installed, there was a small oil leak between the bedblate and the block, and I got so frustrated after waiting almost 2 years for parts and for it to be built, I just pulled it and sold the car. It never saw more than 10 PSI of boost during those 250 break-in miles. The leak has since been fixed.
I would like to sell the motor complete. I am willing to separate the turbo if someone wants, but I really don’t want to separate the head and the block if I don’t have to. The components I put into it are listed below with approximately how much they cost me. All told, I have over $11,000 into the build. I would like to get $6,000 for it, picked up in Pittsburgh, PA. I would like $5,000 for it without the turbo, and $1200 for the turbo separate.
Shimmed B5234T9 block $500
R crankshaft $100
K1 H-beam rods $500
Calico coated main bearings $200
Sputter-Coated Glyco Rod Bearings $200
Custom Wiseco 9:1 pistons with ceramic domes and anti-wear skirts $1000
Assembly/machine work $1000
Professionally ported and polished intake manifold $500
Professionally ported and polished head w/fresh rebuild $1500
Professionally ported and polished ceramic coated exhaust Japanifold $700
Inconel exhaust valves $400
Enem Y21 cams $1400
Pierberg turbo control valve $100
Bosch EV14 750cc injectors $550
Duke City Turbo Bricks Super Hybrid (75mm compressor) turbo w/ ceramic coated exhaust housing $1800
Forge compressor bypass valve $190
Turbosmart IWG75 wastegate $200
Focus RS upgraded oil cooler $200,
Unorthodox Racing lightweight crank pulley $200
Gates kevlar timing set $210
The supporting mods are available below. The prices next to each item are what I paid for them. I would like half of what I paid, plus shipping.
SPEC single-mass flywheel $600
SPEC Stage 3+ clutch (10k miles) $1000
AEM wideband $200
Snow Performance Methanol/water injection $600
Customized airbox w/ huge AEM dryflow filter and R-Kelly mod $100
Audi S4 mass airflow meter $200
IPD silicone wire-reinforced intake pipe $200
Dual gauge pod instrument surround $200
I will be happy to grab more/better photos if you have any specific requests. I am also happy to answer any questions you may have. Thank you!