Featured Products: Build Solid Late-Model Hemi Performance with Callies Performance Engine Blocks from Summit Racing Equipment
Callies Performance Mopar Gen III Hemi Engine Blocks use the latest in CASM (Computer-Aided Solid Modeling), foundry, and CNC technology to produce blocks to the same rigorous standards that make Callies Performance crankshafts and connecting rods a staple of winning race cars the world over.
Mopar Gen III Cast Iron Engine Blocks
Callies Performance Mopar Gen III Cast Iron Engine Blocks are produced using the original Mopar molds, cores, and engineering data, earning them an officially licensed replacement product designation by Mopar. The blocks even carry the authentic Mopar part numbers.
The Mopar Gen III Cast Iron Engine Blocks are available in 6.2L Hellcat and 6.4L “BGE” forms. You can get them as an engine block only; with OptiTorque main stud kit; with main studs and billet aluminum main caps; or main studs, billet main caps, and line hone machined.
Mopar Gen III Hellephant and Drag Pak Aluminum Engine Blocks
Callies Performance Mopar Gen III Hellephant or Drag Pak Aluminum Engine Blocks can support 1,500-plus horsepower. They are cast from A355 aluminum and have billet aluminum four-bolt main caps on journals one and five and six-bolt main caps on journals two, three, and four. The blocks have 4.120-inch machined cylinder bores and will require finish honing to 4.125-inch.
Hellephant
* 9.250-inch deck height
* 6.2L Hellcat/6.4L Scat Pack-BGE timing drive with VCT solenoid
* Standard lifter pattern with .842-inch diameter lifter bores
* Standard cam bore with bearings installed
Drag Pak
* 9.250-inch deck height
* 6.1L SRT timing drive without VCT solenoid
* .937 keyway lifter bushings; requires finish hone
* 60mm RoughBore cam bores, bearings not included
Summit Racing Equipment
www.summitracing.com
1-800-230-3030
